Showing posts with label rain. Show all posts
Showing posts with label rain. Show all posts

Wednesday, 8 May 2013

Rain Gardens vs. Swales

I am researching rain gardens for a new garden design.  The clients live in Richmond, and have a high water table--inches below the surface of their lawn.  They have asked me to design a garden with a rain garden feature, that would tie into a drain.

I have been pondering how to design a rain garden when water frequently sits close to the surface.  If there is no drain, the rain garden will be a pond for most of the winter months.  If there is a drain, where should it be located to be effective?



Rain Garden
Part of my research has been to define the term rain garden.  In fact, a rain garden is a planted garden that holds water for, ideally, no more than 48 hours.  A rain garden may look no different than the rest of the garden, but the soil could be boggy at rainy times of the year.
Dry River Bed


Construction of bioswales on
Blenheim Street, Vancouver
The photographs my clients sent me of their favourite gardens are in fact dry river beds. Dry river beds are not planted, and they may or may not have a lining.  If a dry river bed has a lining, it is designed to move water.  If a dry river bed does not have a lining, it is designed to absorb water, and may have a French drain beneath, which moves water.  A dry river bed should be located at a lower grade than the rest of the garden.






A swale slows the pace of water down a slope. In Vancouver, there are a series of swales on Blenheim street.  Before these were installed, rainfall was channeled down the hill and into drains strategically placed by the road side. Now, the water is channeled into curb breaks, and collects in the swale with much of the water absorbing into the ground.  If too much water is channeled through the curb break at one time, a catch basin at the end of the swale stops the water from flowing over the sidewalk and back onto the street.  The catch basin is higher than the bottom of the swale.  If the catch basin was placed at the bottom of the swale, water would simply collect in that and be swept into the ocean.  The bottom of the swale should be designed with pervious soils to allow water to be absorbed into the ground.

Tuesday, 19 March 2013

Vancouver rain and soil pH

Vancouver's soil is naturally acidic because of the amount of rain that falls.  

Rain is made of water, which is made of two hydrogen atoms and one oxygen atom (H2O).  When the rain falls to earth, it breaks apart into H+ and HO-.  Now the soil has more free H atoms which makes it more acidic.  

The "H" is pH is for hydrogen.  The "p" has a variety of possible explanations, including power or potential.  

The more free H+ atoms in the soil, the lower the number due to a negative logarithmic equation.  

This part can be confusing, but remember rain = more H+ in soil = high acidity = low pH.

Friday, 15 March 2013

Vancouver's soils always have enough phosphorous

We have brought many soil samples into the lab from our Vancouver area properties.  We have never received a recommendation to add phosphorous to the soil, yet phosphorous is one of the big three in the NPK fertilizer formula:  nitrogen, phosphorous, and potassium.  Why do we have ample phosphorous in Vancouver?

Phosphorous breaks into water insoluble compounds in the soil.  Typical chemical fertilizers require water to break down the fertilizer for the plant to feed from the nutrients.  If the phosphorous is water insoluble, then the plants cannot feed off the chemical phosphorous, designed to be used with water.  

This does not mean there is no phosphorous in the soil.  This means the plants cannot take it up, and then show signs of phosphorous deficiency.  The usual response?  Add more phosphorous.  Add to this Vancouver's excessive rainfall, and the result is soil high in phosphorous.

Organic forms of phosphorous are not bound in water-insoluble compounds, and plants can feed from them.